EPOGLASS FR4

preview NEMA FR4
CEI EN 60893 EPGC202
Mil-I-24768 27 GEE-F
DIN 7735 HGW 2372.1
CNR CEI UNEL Tipo EV
Product made from glass fabric and epoxy resin, with good dielectric and mechanical properties even at high temperatures. Low dielectric losses in a moist environment. Flame retardant.
characteristics conditioning average value
Density - 1,85 ÷ 1,9 g/cm³
Maximum operating temperature - 150°C
Electrical resistance between plugs D-24/20 5x104MOhm
Insulation resistance D-24/20 102MOhm
Electric strength perpendicular (⊥) to laminations d-03/90 40 KV/mm
Breakdown Voltage parallel (//) to laminations d-25/90 50 KV
Loss factor tan δ - 50 Hz A 0,05
Loss factor tan δ - 1000 Hz A 0,05
Loss factor tan δ - 1 MHz A 0,02
Dielectric constant (ε) A 5
Comparative Tracking Index (C.T.I.) A 200
Compressive strength perpendicular (⊥) to laminations A 3000 Kg/cm²
Compressive strength parallel (//) to laminations A 2000 Kg/cm²
Tensile strength A 2800 Kg/cm²
Flexural strength A 4500 Kg/cm²
Impact strength (Charpy) A 100 Kg*cm/cm²
Rockwell hardness (scale F) A 65
Water absorption D-24/20 0,2% (≠ 1 mm)
Thermal conductivity A 0,25 W/m*K
     
conditioning    
A   ambient conditions
D-24/20   After 24 hours in water at 20°C
d-03/90   1 minutes at 90°C in oil ≠ 3mm
d-25/90   1 minutes at 90°C in oil ≠ 25mm
Note: The values ​​in this datasheet are approximate and refer to the samples analyzed. The user is required to verify that the product is suitable for the use for which it is intended.
  • Insulating plates

  • Micro-worked filter

  • Elbow-shape spacer

  • Some workpieces

  • Some workpieces